The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] [DG11] A70D memory card. FAT16 or 32?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] A70D memory card. FAT16 or 32?
06-24-19, 08:03 AM (This post was last modified: 06-24-19 03:02 PM by Chuck - Raymarine - Moderator.)
Post: #1
Fastgrandad Offline
Junior Member
**
 		Posts: 7
Joined: Jun 2018
Reputation: 0
[DG11] A70D memory card. FAT16 or 32?
I am assisting a friend who has an A70D MFD that needs its firmware updating. The procedure seems straightforward but I'd like to be sure that the memory cards we're using to load the new firmware and to save the existing User Data are correctly formatted. Can you please advise whether FAT16 or FAT 32 is suitable. I have several 64 and 128MB cards available and have downloaded the instructions for the process.
Many thanks
Paul
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] A70D memory card. FAT16 or 32? - Fastgrandad - 06-24-19 08:03 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication