Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] e97 & e95 touchscreen calibration problems

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e97 & e95 touchscreen calibration problems
06-25-19, 03:54 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] e97 & e95 touchscreen calibration problems
Welcome to the Raymarine Forum quinsky,

I am aware that you have attempted to realign the touchscreen of each MFD. Have you also performed the precision alignment procedure? If so, then it is recommended that you do so to address the reported issue. However, should you have performed the precision alignment procedure and should the problem persist, then it would be recommended that the MFDs be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] e97 & e95 touchscreen calibration problems - Chuck - Raymarine - Moderator - 06-25-19 03:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication