The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [TG] connecting A50 to wheel pilot evolution 100

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] connecting A50 to wheel pilot evolution 100
07-05-19, 03:32 PM (This post was last modified: 07-10-19 05:21 AM by Tom - Raymarine - Moderator.)
Post: #1
Avi Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2019
Reputation: 0
connecting A50 to wheel pilot evolution 100
I just completed the installation of a new EV 100 wheelpilot. there is an A50
chart plotter on board that was previously connected to the ST4000 that I replaced with the EV 100. I want to connect the A50 to the new system(EV100). After talking to an adviser on the Raymarine 800 number, I was advised to purchase a converter (part # E22158)in order to integrate the A50 to the system. Can somebody explain to me how to do the connection? It appears to me that the converter is a cable and another back bone that I already have as part of the EV100 system. thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
connecting A50 to wheel pilot evolution 100 - Avi - 07-05-19 03:32 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication