The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] No Radar Source Found
07-08-19, 06:38 PM (This post was last modified: 07-16-19 05:00 AM by Tom - Raymarine - Moderator.)
Post: #1
No Radar Source Found
Flying Fish Requesting Raymarine Radar Troubleshooting Help--I am getting ready to sail into the busy Torres Straits and my radar is inop. The chart plotter message is "No Radar Source Found." I've gone aloft to check out the connections on the dome and they are good. I have power going from my panel switch to the electronics. The system boots up okay. AIS functions on the radar screen. But there is no radar signature and the Transmit/Standby button is grayed out. I have the Raymarine 4kW 24" HD Color Radome, installed about 30 months ago. There are no Raymarine Service Centers in this part of Australia. Any suggestions would be greatly welcomed. Thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
No Radar Source Found - flying fish - 07-08-19 06:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)