Post Reply 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Anchor watch and Alarm
07-17-19, 01:09 AM (This post was last modified: 07-17-19 01:13 AM by Tom - Raymarine - Moderator.)
Post: #2
RE: Anchor watch and Alarm
Hello Ricco,

Thank you for sharing your suggestion and feedback - this is always appreciated.

We have a monthly internal product-improvement forum, and an improved anchoring process similar to what you describe was presented at one of the recent demonstrations. Your process flow and ideas are all good ones and I'm glad to be able to say that I think that you will see an improved anchoring setup in a future MFD software update. I've added your suggestion to our issue-tracking database as well.

You can already do much of what you describe, it's just not a simple 'Anchor' page layout or process. I would suggest setting up an 'Anchor' shortcut on the homescreen that had a splitscreen chart/radar page, configured to your preferred ranges, Track setup etc., and switching to that app shortcut when anchoring. I'm sure you're aware but the anchor alarm is reached through Home > Alarm > Settings > Anchor Drift.


Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Anchor watch and Alarm - Riccoz - 07-09-19, 02:55 PM
RE: Anchor watch and Alarm - Tom - Raymarine - Moderator - 07-17-19 01:09 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us