[CA] [CA11] Axiom 9 and eS78 quit talking

[dmtjoy]

Hi Chuck
I updated to Lighthouse 3.10.42. on the AXIOM, preformed a factory reset
on both the Axiom and eS78. I tried to set the AXIOM 9 as datamaster. When this is done I loose my AIS data.
Switched back to eS78 as Data master, now when I access chart page on the AXIOM 9 it goes into a continuous reboot cycle between "AXIOM" and the start of the chart page (shows only numbers). There is a brief time that the Lighthouse 3 lighthouse is displayed. all other functions appear to work correctly. All functions on the eS78 appear to work properly also.

Thanks
Doug.