Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] C70 , AIS via seatalkng2 port?
07-17-19, 06:52 AM (This post was last modified: 07-22-19 02:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
Information [DG11] C70 , AIS via seatalkng2 port?
I know i can connect my AIS (GX2200E) nav desk to my C70 MFD (in cockpit)via the nmea socket, but i have a newly fitted Evolution autohelm (acu 400) fitted with backbone that runs to my helm. My gps and radar go to the C70 . I have a stand alone fallback gps (Garmin )and Navtex installed too.
So instead can i interface the GX2200E to the seatalkng backbone and connect the C70 to the seatalkng backbone via the seatalkng2 socket on the back? If i can, would i need to for the future?.
I have wireless Tacktic instruments which i may connect later too. I may upgrade the C70 in a couple of years as well. I have a 38ft boat and plan to go further a field, im technically ok, but some of the terminology is new to me thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] C70 , AIS via seatalkng2 port? - daisy2476 - 07-17-19 06:52 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us