The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / NMEA0183 AIS output from E95 chart plotter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA0183 AIS output from E95 chart plotter
07-23-19, 09:20 PM
Post: #1
GSwannell Offline
Junior Member
**
 		Posts: 5
Joined: Mar 2016
Reputation: 0
NMEA0183 AIS output from E95 chart plotter
I have an AIS650 unit linked to the backbone and AIS data is displayed just fine on the E95 chart plotter. However I need to get NMEA0183 data for notebook software OpenCPN. I have an Actisense USG-2 unit and can read NMEA0183 output from the E95 (via Actisense NBF-3 buffer) succesfully on OpenCPN but there is no AIS data. For the time being I can read AIS data from the USB output from the AIS650 and display on OpenCPN. My question is how can I get one source of NMEA0183 to include the AIS data as well as usual E95 data?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA0183 AIS output from E95 chart plotter - GSwannell - 07-23-19 09:20 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication