Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] must transducer be on startboard side?
08-29-19, 12:45 PM (This post was last modified: 08-29-19 12:46 PM by Chuck - Raymarine - Moderator.)
Post: #8
RE: [CA11] must transducer be on startboard side?
the Brain,

Unfortunately, I don't have any recommended minimum for/aft offset for mounting a transom mounted transducer for bracket mounted engines and kicker motors. If mounting on the kicker on the starboard side of the transom, then the transducer should be installed on the starboard side of the kicker, outside of the arc of the prop when engine is rotated fully to starboard. This will typically cause the transducer to be mounted higher with respect to the waterline, which may affect performance while operating at planing speeds.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] must transducer be on startboard side? - Chuck - Raymarine - Moderator - 08-29-19 12:45 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)