[CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices

08-20-19, 10:25 AM (This post was last modified: 08-20-19 10:26 AM by Chuck - Raymarine - Moderator.)

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices

Dustdevil,

I'm glad to learn that issue has resulted from an incorrect configuration of the i50 Tridata's master/repeater settings. Should the system feature an iTC-5, then the system must additionally include an i70S/i70 MFID. The latter is required to calibrate and configure alarms associated with transducers which have been interfaced to an iTC-5.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Dustdevil - 07-30-19, 09:20 AM

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Chuck - Raymarine - Moderator - 08-02-19, 10:52 AM

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Dustdevil - 08-12-19, 01:04 PM

RE: [CA11] No depth data on Seatalk NG, shows up fine on nmea 2000 connected devices - Chuck - Raymarine - Moderator - 08-20-19 10:25 AM

User(s) browsing this thread: 1 Guest(s)