The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] VHF TO GPS HOW DO I CONNECT

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] VHF TO GPS HOW DO I CONNECT
09-25-19, 08:44 AM (This post was last modified: 09-25-19 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #1
jaberwoky Offline
Junior Member
**
 		Posts: 3
Joined: Sep 2019
Reputation: 0
[CA11] VHF TO GPS HOW DO I CONNECT
Hi I have a Raymarine A78 Wi Fi Chartplotter/Sonar combi unit and a Standard Horizon 1600e I would like the easiest way to connect the 2 for DSC use, I have an eight inch ST ng cable the white end will connect into the back of my A78 with a silver plug on the other end. The VHF is a standard horizon 1600e which I believe works on the NMEA 0183 which has 4 split wires to connect to gps blue green gray and brown, can i strip the end off my ST ng cable to reveal 4 wires? or buy a plug with 4 split wires to connect together or can I buy a separate gps Arial and connect direct, so the A78 will have its own gps signal so the VHF Radio will be connected to it own gps but I would prefer to connect to the A78
Please see pics attached


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] VHF TO GPS HOW DO I CONNECT - jaberwoky - 09-25-19 08:44 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication