Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ray 60 - not getting GPS data - Screen display
06-01-16, 01:38 PM (This post was last modified: 06-03-16 09:19 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Ray 60 - not getting GPS data - Screen display
Welcome to the Raymarine Forum Bart,

When the Ray50/Ray60/Ray70's Backlight level setting is configured to OFF, the screen will appear as a monochrome grey scale LCD. Configuring the Backlight level to one of the numbered settings is designed to illuminate the screen's background (amber) with increasing brightness/color through the level 9 setting. Should you VHF radio not be performing as described in this paragraph, then it is recommended that the VHF radio be bench checked / serviced by Raymarine’s Product Repair Center.

Nothing need be configured within the VHF radio to report GPS data if interfaced correctly to the system. If the SeaTalkng backbone is being powered by the SeaTalkng backbone, then please specify the model of ACU which has been installed onboard.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Ray 60 - not getting GPS data - Screen display - Chuck - Raymarine - Moderator - 06-01-16 01:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)