The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] P70 continuous reboot cycle
11-19-19, 07:20 AM (This post was last modified: 11-19-19 10:05 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] P70 continuous reboot cycle
The P70 is constantly rebooting itself. I've removed it and powered it on a bench up to 13.2V and while it is stable when untouched it then reboots as soon as I try to press buttons on it.
I tried to update the software but it is not stable enough on the network to be seen by the MFD. I will next update the MFD software to the latest to see if that helps but if the P70 is unstable even when off the network on its own supply that seems to be a bigger problem.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] P70 continuous reboot cycle - Denis+Ellis - 11-19-19 07:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)