[CA] [CA11] Turning 2D sonar off in Element HV

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Ylllis,

Q1. Can I turn off the 2D sonar, while simultaneously keeping on the side imaging of the Element HV unit?
A1. Negative. Changing the Ping state within a sonar application pane (for any type of sonar) will cause all pings from the HV transducer to cease.

Q2. It would solve my problem if there is a a way of placing the transducers so that they would not interfere with each other.
A2. You may want to experiment with switching the 200kHz fishfinder OFF and then adjusting (i.e. increasing) the sensitivity within the 2D Sonar to permit returns from the lure to be observed within the Sonar application.