Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] No radar trails after LH2 to LH3 on ES97
11-28-19, 05:59 AM (This post was last modified: 12-02-19 09:26 AM by Chuck - Raymarine - Moderator.)
Post: #1
[LW11] No radar trails after LH2 to LH3 on ES97
After swapping over to LH3 on my ES97, I can't seem to find a way to display radar trails anymore - a feature that is sorely missed.

The attached two JPGs seem to show a discrepancy and may be related to my issue. One is a screenshot of the LH3 operator's manual, while the other is a photo of what is displayed on my MFD on what "should" be the same page. Obviously different however. I've surfed every menu, screen, drop down, etc on the MFD and can't seem to pinpoint why I can't toggle trails on. Any opinion? Thanks very much.
Find all posts by this user
Quote this message in a reply
11-29-19, 09:24 AM (This post was last modified: 12-02-19 09:28 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [LW11] No radar trails after LH2 to LH3 on ES97
Dear Mooseflyer,

Can you confirm the menu you are using as I have the ability for trails on my eS with 3.11.42

HOMESCREEN> RADAR APPLICATION > MENU > TARGET SETTINGS > scroll down to trails

I have noticed you are in the chart app with radar overlay on, this will not have the feature to show trails. Please try using the instructions I have provided above.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
11-29-19, 10:32 PM (This post was last modified: 12-02-19 09:28 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [LW11] No radar trails after LH2 to LH3 on ES97
Thanks for your reply Louise. I'll try that next time I'm down at the boat.
Find all posts by this user
Quote this message in a reply
12-02-19, 09:49 AM
Post: #4
RE: [LW11] No radar trails after LH2 to LH3 on ES97
You are welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us