Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] trouble reading card - Dragonfly 7pro
12-01-19, 11:46 PM (This post was last modified: 12-02-19 09:29 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] trouble reading card - Dragonfly 7pro
Hi - I have a DragonFly 7pro. I recently purchased a Navionic Card (+regions, Australia). I have activated the card and inserted it into the unit but it does'nt appear to be reading the information?
Find all posts by this user
Quote this message in a reply
12-03-19, 08:05 PM
Post: #2
RE: [TG11] trouble reading card - Dragonfly 7pro
Hello Phil,

What's the process you're using to determine that the chart isn't being read?
You can check whether the display is able to access the MicroSD card by going to the Settings page > Backup and Reset > Save Data to Card. If you can save waypoints to the card then the display's card reader is working ok.

A couple of common causes of questions like this are:
- running the display in a shed or indoors in order to test it out, but not having a GPS fix and therefore not jumping to the correct location that the chart data covers
- having the wrong chart type (Dragonfly can read C-Map, Navionics or Raymarine Lighthouse charts) selected in the menu
- looking at the current (perhaps inland) location or another area not covered in detail by the chart card.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us