Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom and Mercury Vessel View
12-06-19, 07:29 AM (This post was last modified: 12-06-19 01:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom and Mercury Vessel View
I know there are proprietary issues involved but is there any talk of Axiom/Lighthouse software integrating with Mercury Vessel View so engine data from the vessel view module can be displayed on the Axiom engine page via bluetooth?
Find all posts by this user
Quote this message in a reply
12-06-19, 01:23 PM
Post: #2
RE: [CA11] Axiom and Mercury Vessel View
Welcome to the Raymarine Forum Travermd11,

Please click here to view a FAQ addressing this subject. Raymarine system require wired communications path to the engine system to permit the marine electronics to display/utilize engine data. Early VesselView systems required a SmartCraft to NMEA 2000 Gateway (available from Mercury Marine) to communicate with the vessel's marine electronics SeaTalkng / NMEA 2000 backbone. Later VesselView displays feature a NMEA 2000 port, permitting the VesselView display to be interfaced as a spur to the vessel's marine electronics SeaTalkng / NMEA 2000 backbone.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us