[CA] [CA11] HD Radar Connectors
|
12-09-19, 02:12 AM
(This post was last modified: 12-09-19 05:38 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] HD Radar Connectors
I Have a Raymarine HD Digital Radar and I need to replace the connector for cable attachment to the radar as well as the connector to the high speed switch. Do you have part numbers?
|
|||
12-09-19, 05:45 PM
(This post was last modified: 12-09-19 05:46 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] HD Radar Connectors
Welcome to the Raymarine Forum Undercutter,
Unfortunately, Raymarine does not offer replacement plugs for Digital Radar Cables. Should radome/pedestal end of the Digital Radar Cable have failed, then the Digital Radar Cable must be replaced. The RayNet Ethernet plug of a Digital Radar Cable, may be replaced by splicing the cable to any Raymarine RayNet Cable or RayNet Adapter featuring a RayNet (F) plug on one end. Similarly, RJ54 Ethernet plug of a Digital Radar Cable, may be replaced by installing new and commonly available shielded RJ45 plug onto the cable. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)