Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] New Cable for ST2000
12-10-19, 12:34 PM (This post was last modified: 12-10-19 04:34 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] New Cable for ST2000
I need to replace or cut and extend the lead cable on my ST2000 as its been shortened too much by a previous owner and the terminal connector needs to be redone due to a bit of corrosion... it looks like 2C 16 AWG power (Brown and Blue) with a 22 AWG (yellow) Shielded signal wire.

Anyone know where I can get a replacement bit of wire and what its called?

Thankyou
Find all posts by this user
Quote this message in a reply
12-10-19, 04:41 PM
Post: #2
RE: [CA11] New Cable for ST2000
Welcome to the Raymarine Forum Glen,

The cable assembly (including plug) which is used to connect the ST2000 to its bulkhead socket is permanently connected to the ST2000. Replacement cable for the ST2000 are not available as a customer serviceable part. It is recommended that the ST2000 be sent to Raymarine’s Product Repair Center to be have its cable replaced.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us