Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Adding a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFDs
01-13-16, 09:24 AM (This post was last modified: 01-12-17 02:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
Adding a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFDs
Adding a/c/e/eS/gS-Series MFD(s) to a network featuring E-Series Classic MFDs

Unfortunately, E-Series Classic MFDs (E80, E120) may not be interfaced to an Ethernet (SeaTalkhs/RayNet) network which also features a/c/e/eS/gS-Series MFDs (note the difference in the case of the letters used within these model names). While it is possible to interface the a/c/e/eS/gS-Series MFDs to a common SeaTalkng backbone to which the E-Series Classic MFDs have also been interfaced, communications would be limited to alphanumeric, GPS, instrument, navigational, and system status data between these systems. Correspondingly, it is not possible for E-Series Classic MFDs to share graphical data such as cartography, radar, fishfinder, or Sirius Marine Weather with an a/c/e/eS/gS-Series MFD.

Should full functionality dual station or multi-station capability be desired, then it would be necessary to replace the E-Series Classic MFDs with a complete suite of a/c/e/eS/gS-Series MFDs. Any combination a/c/e/eS/gS-Series MFDs may be installed within an a/c/e/eS/gS-Series MFD network.

Raymarine offers the following mounting kit accessories (R70010 (C/E80 Classic MFDs) R70011 (C/E120 Classic MFDs) to adapt C/E-Series Classic MFD Raymarine flush mount cutouts for use with the new c/e-Series MFDs. Raymarine has not produced similar mounting kits for replacing C/E-Series Widescreen MFDs with a/eS/gS-Series MFDs. These kits include a mounting plate to be installed over the existing mounting surface and a bezel and suncover to replace those packaged with the MFDs.

RAYFAQ#
Visit this user's website Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us