Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter
12-11-19, 09:57 PM (This post was last modified: 12-12-19 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
[LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter
Will the Raymarine E70010 ITC-5 Instrument Transducer Converter work for other manufacturer's analog wind instruments, specifically Data Marine Wind Machine?
Find all posts by this user
Quote this message in a reply
12-12-19, 05:43 AM (This post was last modified: 12-12-19 01:03 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter
Dear NS30paul,

The iTC-5 will only work with Raymarine transducers. Your third party wind transducer will not work with the iTC-5. Do you have the instrument still? Can you output the data over NMEA to share wind data on the network?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
12-12-19, 12:54 PM (This post was last modified: 12-12-19 01:04 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter
I still have the Data Marine wind machine (Corinthian) and it is functional. I don’t believe it has digital output to directly feed into nmea. I would like to have wind speed and direction fed to my Axiom 9.
Is there a way or is thee a masthead unit that I can buy without the display module?
Find all posts by this user
Quote this message in a reply
12-19-19, 03:45 AM
Post: #4
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter
Dear NS30Paul,
Find all posts by this user
Quote this message in a reply
12-19-19, 04:55 AM
Post: #5
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter
Dear NS30Paul,

Thank you for your response.

The iTC-5 will work with either one of our short or long arm wind vane without the requirement of an instrument display and the transducer directly connected to the iTC-5.

The part numbers are as follows;
Short arm vane transducer with 30m cable E22078
Long arm wind vane transducer with 50m cable E22079

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)