Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] transponder/s
12-16-19, 02:34 PM (This post was last modified: 12-17-19 03:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] transponder/s
Hi, what transponder set up would produce the best performance out of a ES98? The boat is a 33' single shaft driven prop. 30knts, max depth 300'
thanks
Find all posts by this user
Quote this message in a reply
12-17-19, 03:42 PM
Post: #2
RE: [CA11] transponder/s
Welcome to the Raymarine Forum Pugwash North,

While it is possible to interface the MFD to an external fishfinder sounder module to support SideVision sonar imaging (via CPT200 w/CPT-200 xducer), 600W/1kW 50kHz/200 conical sonar imaging (via CP370 w/compatible xducer), or 1kW CHIRP sonar imaging (via CP470/570 w/compatible xducer), the internal fishfinder circuitry of the ax8 and eSx8 MFDs is exclusively designed for use with DownVision transducers and CPT-S transducers. A thru-hull DownVision transducer would typically be recommended for this application.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)