Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Default Waypoint symbols
12-29-19, 02:39 PM (This post was last modified: 12-30-19 01:19 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Default Waypoint symbols
Is there a way to change the default Waypoint symbol on the latest version of Lighthouse (3.11.42)? When I create a new set of waypoints (either via a route or other), it defaults the waypoint symbol to the red dot.

I know you can post edit the waypoints once they're in the waypoint list with the Multi-edit, but this just requires one more step.
Thanks,
Find all posts by this user
Quote this message in a reply
12-30-19, 01:23 PM
Post: #2
RE: [CA11] Default Waypoint symbols
Welcome to the Raymarine Forum sv.JoyRide,

Thanks for the product feature inquiry. Unfortunately, the feature which you have inquired about is not supported within LightHouse 3 v3.11.42 software. A feature request will be logged to consider this feature for inclusion within a future LightHouse 3 software update.

Please click here for more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)