Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 1kw and RV transducer?
02-17-20, 07:57 AM (This post was last modified: 02-19-20 05:30 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] 1kw and RV transducer?
Hello, I’m looking at a boat with a Axiom 12 Pro with a 1 kw through hull transducer. I’d like to also have the side scan capabilities. I understand that there are two ports for 1 kw and RV transducers. I assume that if I add the RV I will be able to have the capability of the 1 kw CHIRP and also the sidescan? How does that work? Is there a way to select on the menus? Thanks in advance.
Find all posts by this user
Quote this message in a reply
02-20-20, 11:26 AM (This post was last modified: 02-20-20 11:29 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] 1kw and RV transducer?
Welcome to the Raymarine Forum Reid,

Within each Fishfinder application page/pane, the user may select the sonar channel (from the Fishfinder application's menu) to be viewed. Accordingly, it is possible to view up to four sonar channels simultaneously as shown within the image below.

[Image: Axiom-Sonar-3.jpg]
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)