Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Mfd E7 AIS
01-25-20, 10:27 PM (This post was last modified: 01-27-20 05:51 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Mfd E7 AIS
For a long time now my e7 mfd has occasionally flashed up the message lost gps or lost ais. It is using the inbuilt gps and this usually sorts it self quite quickly. The ais used to reconnect quickly but now the only way I can get it to reconnect is to turn off the display and turn it back on again. This leads me to think that the problem is with the e7 not the ais. It also appears to happen more often when the e7 is getting hot from the sun. When I managed to get it working the other day I shaded it and it stayed on. Any ideas, I have disconnected spray cleaned the connections and reconnected all of the leads.
We have plenty of power from the batteries so it is not a low voltage problem.
Find all posts by this user
Quote this message in a reply
02-06-20, 05:53 AM
Post: #2
RE: [LW11] Mfd E7 AIS
Dear Philtadd,

Thank you for your post.

What software revision is the E7 on?

What are you using as a source for GPS data? Is it always the internal GPS?

How is the system networked together? Can you send a system diagram to me please?

Where is the vessel located?

What is the supply voltage at the back of the E7?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)