Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Raymarine Cartography Adaptor
01-31-20, 10:41 AM (This post was last modified: 02-03-20 11:17 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine Cartography Adaptor
We purchased a Sealine which has a Raymarine C80, as we could not get charts for it and were advised to purchase Navionics charts and a Raymarine Chartography Adaptor - which we did - a note with the adaptor says a software upgrade may be required - you will need to upgrade your product to the latest software before use - can you confirm if it is the software on the C80 or the software on the adaptor that needs to be upgraded?
Find all posts by this user
Quote this message in a reply
02-03-20, 11:20 AM
Post: #2
RE: [CA11] Raymarine Cartography Adaptor
Welcome to the Raymarine Forum lawlerl,

As indicated within the Software History table of the C-Series Classic MFD software update web page, support for the Raymarine Cartography Adapter (uSD / CF adaptor) was introduced with the v5.04 software update. Accordingly, should the MFD currently be operating with earlier software, then it would be necessary to update the MFD's software with C-Series Classic MFD v5.16 software (the final software update).
Visit this user's website Find all posts by this user
Quote this message in a reply
02-04-20, 07:27 AM
Post: #3
RE: [CA11] Raymarine Cartography Adaptor
Many thanks Chuck,

We'll check the software and update if needed.
Find all posts by this user
Quote this message in a reply
02-04-20, 08:26 AM
Post: #4
RE: [CA11] Raymarine Cartography Adaptor
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us