Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Rv220 and b175m together on axiom
02-18-20, 11:03 PM (This post was last modified: 02-20-20 11:31 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Rv220 and b175m together on axiom
Hello i installed twin dv220 transducers with an axiom (not pro)9
And the sonar depth finder is not able to read bottom at over 5mph

So i am hoping to add a b175m and a sonar module 470 hopefully improve my depth finding ability and depth range.

The question i have is With the 470 installed, will i be able to run the twin 220 transducer at same time i run the b175 with my non pro axiom 9?
Find all posts by this user
Quote this message in a reply
02-20-20, 11:30 AM
Post: #2
RE: [CA11] Rv220 and b175m together on axiom
Welcome to the Raymarine Forum a7ewizard ,

Q1. If I add the CP470 chirp module and run a B175L transducer, can I run and split screen views of both the RV-100 high chirp and the B175 low chirp simultaneously?
A1. Yes.

Q2. If that works, I assume I could also split screen the other sonar modes with the B175L chirp.
A2. Correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)