Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] s1000 autopilot
02-27-20, 05:23 PM (This post was last modified: 02-28-20 10:06 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] s1000 autopilot
Just bought a new Ev 150 auto pilot at the AC boat show. Good deal there. Friend wants to buy my old S1000 system for his Twinn engine 28 ft center console. It has a !.7 sea starr steering system. Will it work on that boat? Thanks Drew Ryan.
Find all posts by this user
Quote this message in a reply
02-28-20, 10:14 AM
Post: #2
RE: [CA11] s1000 autopilot
Welcome to the Raymarine Forum Drew,

According to the S1000 Installation Guide, the S1000 Autopilot is intended for use in:
• HC5345, HC5347, HC5348, and HC5358 SeaStar steering systems.
• Systems with HC4600, HC4645, HC4647, HC4648, and HC4658, BayStar steering rams.
• Systems with Hynautic K6 steering rams.

Should the vessel have one of the above listed steering rams, then it may be used with the S1000.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)