Raymarine forum / Raymarine Forums / Networking / System Integration v / Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
12-21-16, 01:04 PM (This post was last modified: 12-21-16 02:51 PM by Chuck - Raymarine - Moderator.)
Post: #16
brewgyver Offline
Junior Member
**
 		Posts: 4
Joined: Aug 2016
Reputation: 0
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter
Hi Chuck, thanks for the speedy reply!
I mistakenly bought the E70196 kit, not the E22158, but they appear to use the same converter, and just have different cables packaged in the kit, so I simply need to get the A06073 cable, disconnect the red (ve+) and connect only signal and shield as discussed, correct?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Connecting SeaTalk1 and NMEA2000 using the SeaTalk Converter - brewgyver - 12-21-16 01:04 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication