Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] speaker and interference?
03-27-20, 02:48 PM (This post was last modified: 03-27-20 03:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] speaker and interference?
Hello,

I will be installing a CP100 sounder module and would like to know if it is near a stereo speaker will that cause any interference?

Tony Flanders
Wasilla,Ak.
c97, CP100/CPT100, RD418D, RS130
Find all posts by this user
Quote this message in a reply
03-27-20, 03:32 PM (This post was last modified: 03-27-20 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] speaker and interference?
Tony,

Raymarine has not specified to maintain the CP100 away from speakers and I doubt that the speaker would have any adverse performance upon the CP100's performance. However, it is not recommended that transducer cable be bundled with other cables, as noise from the other cables may result in a coupling effect which manifests itself as noise within the resulting sonar plot.
Find all posts by this user
Quote this message in a reply
03-27-20, 04:06 PM
Post: #3
RE: [CA11] speaker and interference?
thanks again Chuck!

Tony Flanders
Wasilla,Ak.
c97, CP100/CPT100, RD418D, RS130
Find all posts by this user
Quote this message in a reply
03-27-20, 05:42 PM
Post: #4
RE: [CA11] speaker and interference?
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)