Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CAM220IP Bend Horizon
05-15-20, 07:26 PM
Post: #1
CAM220IP Bend Horizon
The attached image shows in the top left the picture from a CAM220IP which is 10.5m above the water line. The bottom left shows a similar picture from an M232 about 0.5m higher.

The M232 picture (with its tighter field of view) shows a level horizon. (Slightly slanting because the boat was moving and stabilization was off).

The CAM220IP shows a much more curved horizon across its' FOV.

I cant find a setting to correct this curvature.

Please advise.

Thanks
John
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)