Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
adding 2nd STng converter in system
06-16-16, 06:52 PM
Post: #1
adding 2nd STng converter in system
I'm adding an older VHF radio with DSC function to the network. The terminators at the end of the backbone run are inaccessible. (wire runs are full and won't take another cable) That's why I need another converter, placed in the cabinet near first one. Now am connecting new converter to the existing converter . . . all sockets are used, no terminators at the converter. Have already connected wiring from the radio to the new STng converter.
Can you please tell me if this attached wiring diagram is correct?

Thank you,
Gary B.
Find all posts by this user
Quote this message in a reply
06-17-16, 11:10 AM
Post: #2
RE: adding 2nd STng converter in system
Gary,

Your proposed method of adding a second SeaTalk to SeaTalkng Converter is correct from a SeaTalkng cabling perspective. However, within seeking to supply a VHF radio with 4800 BAUD NMEA 0183 GPS data, the ST-STng Converter's yellow SeaTalk socket would be used per the information found here.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-18-16, 01:23 PM (This post was last modified: 06-20-16 10:11 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: adding 2nd STng converter in system
Does this require a dedicated ST-STNG Converter? Or can the ST wiring be configured like any other ST device (5 maximum) on the ST bus via either daisy-chaining or a D244 junction box?

Lulu: 36' Little Harbor WhisperJet
Raymarine: Axiom 12 RV, RV200, Axiom 12 Pro, Evo 1/ACU 150/P70RS, Quantum Q24C, HS5
---previous----
Refugio: 44' trawler
Raymarine: ACU-400, EV-1, P70R, a78, M81105 RFU, ST60 RAI, E22158 ST-STNG
NMEA 2000: Garmin 740S & GMR18 HD, Airmar WS-200WX, Actisense NGT-1
Find all posts by this user
Quote this message in a reply
06-20-16, 10:12 AM
Post: #4
RE: adding 2nd STng converter in system
Keith,

A dedicated SeaTalk to SeaTalkng Converter must be used when it will be used to transmit 4800 BAUD NMEA 0183 GPS data sentences.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us