Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Where are the manual settings ?
07-19-16, 11:19 PM
Post: #1
Where are the manual settings ?
Hello,
I have a Dragonfly 5dvs. Chapter 8.11 of the user manual refers to manual settings (as opposed to Auto mode) for gain and noise. However, I cannot find them anywhere in the menus. Do they actually exist for this model and where?
I have the latest software installed (12.09).
Thanks.
Find all posts by this user
Quote this message in a reply
07-20-16, 09:52 AM
Post: #2
RE: Where are the manual settings ?
Welcome to the Raymarine Forum levistic,

Use the command sequence OK->DOWNVISION SENSITIVITY to access the Gain, Contrast, and Noise Filter sensitivity settings. To change a setting from Auto to Manual, select the item to be adjusted (ex. Gain, etc.), press the OK button, and then rotate the UniController's knob to adjust the sensitivity item to the desired setting.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)