Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E120 upgrade
07-29-16, 07:52 AM
Post: #1
E120 upgrade
As I glanced at the flat rate repair schedule I see that the E120 is not listed for repair. What upgrade model would cover the existing cutout? What 18" radome is recommended? Is a Seatalk HS switch required for sharing DSM300 connection or is there enough ports on the upgrade unit? Thank you.

Rich
Find all posts by this user
07-29-16, 10:52 AM
Post: #2
RE: E120 upgrade
Welcome to the Raymarine Forum Rich,

E-Series Classic MFDs are no longer listed because the complete set of parts required to repair all facets of these MFDs are no longer available. It would typically be recommended that an e125 or e127 be purchased, as flush mount adapter kits are available for adapting these MFDs to be mounted in place of an E120 E-Series Classic MFD. Please click here to view a FAQ addressing this subject. The 12" e-Series MFDs feature a pair of Ethernet Network sockets, permitting up to two other compatible devices featuring an Ethernet communications interface (ex. HD Digital Radome, DSM300, Thermal Camera, etc.). Should more than two compatible devices featuring an Ethernet communications interface need to be interfaced to the MFD, then a HS5 RayNet Network Switch would be required.
Find all posts by this user
07-30-16, 04:58 AM
Post: #3
RE: E120 upgrade
Thank you and have a great day.

Rich
Find all posts by this user
08-01-16, 02:51 PM
Post: #4
RE: E120 upgrade
You're welcome. Have a great day!
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)