Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autohelm to seatalk ng
08-02-16, 03:12 PM
Post: #1
Autohelm to seatalk ng
Hello:

We are installing a new e165 MFD, quantum chirp radar, thermal imaging, Sirius weather...

We have a perfectly working (1990) Autohelm ST50 instruments, wind, speed, depth and Multi.

1. Can we use existing transducers for speed, wind and depth? If so, what is needed to connect them to the seatalk NG network?

2. Can we use the existing ST50 instruments to display readouts of the wind, speed, depth and to send the information to the seatalk NG network, or the reverse, for the MFD to send the data to the instrument displays via a seatalk to seatalk ng converter?

3. We have an autopilot SG3 (2004) course computer with an ST6001 control head. Can we interface the autopilot or the entire system including wind, depth and speed to the MFD?

Thanks,

Jeff
Find all posts by this user
Quote this message in a reply
08-08-16, 01:13 PM
Post: #2
RE: Autohelm to seatalk ng
Welcome to the Raymarine Forum Lazybones,

Q1. Can we use existing transducers for speed, wind and depth? If so, what is needed to connect them to the seatalk NG network?
A2. See your other threads in which we had previously addressed this question.

Q2. Can we use the existing ST50 instruments to display readouts of the wind, speed, depth and to send the information to the seatalk NG network, or the reverse, for the MFD to send the data to the instrument displays via a seatalk to seatalk ng converter?
A2. See your other threads in which we had previously addressed this question.

Q3. We have an autopilot SG3 (2004) course computer with an ST6001 control head. Can we interface the autopilot or the entire system including wind, depth and speed to the MFD?
A3. A SeaTalk to SeaTalkng Converter may be used in conjunction with a S3G Autopilot Course Computer and ST6001 Autoilot Control Head. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)