Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
double digit speed on Racemaster
07-22-16, 02:01 AM
Post: #1
Information double digit speed on Racemaster
Can anyone help me figure out how to get my speed set to double digits on my Racemaster displays?

The system I use is 2 Racemaster displays in Master/Slave config. I know where to find the setting to set speed to 0.00 and the system is currently set to display double digits, but the speed only shows up as single digit, so 5.8 kts, in stead of 5.83 what I would like to see.

Sofar I have tried to reset settings to 0.0, then restart, then change back to 0.00 and then restart again. Nothing seems to help.

From when I bought the boat(J/80), during the trysail I know the system has worked with double digits, but somehow the setting got changed (unwillingly) and I want it back!
Find all posts by this user
Quote this message in a reply
07-22-16, 03:39 PM
Post: #2
RE: double digit speed on Racemaster
Welcome to the Raymarine Forum RaceMasterJ80NL,

Should you have configured the Speed display to display speed data using two digits to right of the decimal point via the Race Master's setup menus in the manner which you have described and the system is not responding accordingly, then is recommended that the Race Master display be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
08-09-16, 11:20 AM (This post was last modified: 08-09-16 11:55 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: double digit speed on Racemaster
Thanks for the response Chuck! Do you mean a local Raymarine Repair dealer, such as Shipshape in Almere, The Netherlands (they are 15minutes from where my boat is)? Or to another dedicated Instrument Repair Center in the US?
Find all posts by this user
Quote this message in a reply
08-09-16, 12:02 PM (This post was last modified: 08-09-16 12:04 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: double digit speed on Racemaster
RaceMasterJ80NL,

Per the Raymarine Forum's registration agreement, all Raymarine customers and prospective customers are invited to search the Raymarine Forum for information about Raymarine products, customers and prospective customers located or operating outside of North/Central/South America, the Caribbean Sea, and Bermuda should seek support through your local Raymarine office using the links below and questions may be asked and answered in your local language. Please use the correct form, as any emails that come through to the incorrect region will be forwarded to the local Raymarine office which will result in a delay in a response.

Australia - http://www.raymarine.com.au/knowledgebas...arine.cfm?
Denmark - http://www.raymarine.dk/knowledgebase/askraymarine.cfm?
France - http://www.raymarine.fr/knowledgebase/askraymarine.cfm?
Germany - http://www.raymarine.de/knowledgebase/askraymarine.cfm?
Italy - http://www.raymarine.it/knowledgebase/askraymarine.cfm?
Netherlands/Belgium - http://www.raymarine.nl/knowledgebase/askraymarine.cfm?
Norway - http://www.raymarine.no/knowledgebase/askraymarine.cfm?
Finland - http://www.raymarine.fi/knowledgebase/askraymarine.cfm?
Spain - http://www.raymarine.es/knowledgebase/askraymarine.cfm?
Sweden - http://www.raymarine.se/knowledgebase/askraymarine.cfm?
UK - http://www.raymarine.co.uk/knowledgebase...arine.cfm?

Correspondingly, should the vessel be located within North/Central/South America, the Caribbean Sea, or Bermuda, then the product should be sent to Raymarine’s US Product Repair Center. Should the vessel be located in another region of the world, then it is recommended that the corresponding Raymarine office listed above be contacted for information concerning where the product may be serviced ... in this case Netherlands/Belgium - http://www.raymarine.nl/knowledgebase/askraymarine.cfm? .
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)