Raymarine forum / Raymarine Forums / Multifunction Displays v / NMEA 2000 bus crash

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA 2000 bus crash
08-30-16, 11:16 AM (This post was last modified: 10-31-16 08:05 AM by Chuck - Raymarine - Moderator.)
Post: #9
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: NMEA 2000 bus crash
George,

Raymarine's MFDs do not have configuration settings to permit what is or is not transmitted to a NMEA 2000 backbone. Regarding use of a DST800 within a Raymarine system, an i70 MFID must be installed with these smart transducers to function as the Data Master for Speed, Temp, and Depth data from this transducer. Alarms, offsets, and calibration of the DST800 are all configured via the i70 MFID, not by the MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA 2000 bus crash - george123 - 08-24-16, 12:27 PM
RE: NMEA 2000 bus crash - george123 - 08-26-16, 05:13 PM
RE: NMEA 2000 bus crash - george123 - 08-30-16, 06:55 AM
RE: NMEA 2000 bus crash - george123 - 08-30-16, 08:27 AM
RE: NMEA 2000 bus crash - george123 - 08-30-16, 10:09 AM
RE: NMEA 2000 bus crash - Chuck - Raymarine - Moderator - 08-30-16 11:16 AM
RE: NMEA 2000 bus crash - george123 - 08-30-16, 11:26 AM
RE: NMEA 2000 bus crash - george123 - 08-30-16, 03:00 PM
RE: NMEA 2000 bus crash - george123 - 09-08-16, 05:36 PM
RE: NMEA 2000 bus crash - george123 - 09-12-16, 04:29 PM
RE: NMEA 2000 bus crash - george123 - 10-06-16, 10:06 PM
RE: NMEA2000 bus crash - george123 - 10-28-16, 06:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication