Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Voyage Planner Scanning for my E127
09-13-16, 05:13 PM
Post: #1
Voyage Planner Scanning for my E127
My Voyage Planner is opened, my E127 is turned on. WiFi on both PC and E127 are turned on. yet my Voyage Planner scans, but can not find the E127, yet the E127 shows it is connected to my home Network. Any ideas?
Bill
Find all posts by this user
Quote this message in a reply
09-14-16, 09:35 AM (This post was last modified: 09-14-16 09:35 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Voyage Planner Scanning for my E127
Welcome to the Raymarine Forum Bill,

Please note that I have duplicated the reported issue and have logged a problem report to seek its correction within a future update to the Voyage Planner software. In short, after configuring the computer's Wi-Fi settings to connect to the MFD and verifying the connection to the MFD, the Voyage Planner application never establishes communications with the MFD (i.e. the status icon continuously reports Scanning for MFD. Until a software update correcting this issue is released, it is recommended that waypoints and routes be transferred to the MFDs via a microSD memory card.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us