Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Which a/c/e/eS-Series MFDs may the xducer from my A-Series Classic MFD be used with?
10-03-16, 08:33 AM (This post was last modified: 01-10-17 04:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
Which a/c/e/eS-Series MFDs may the xducer from my A-Series Classic MFD be used with?
Which a/c/e/eS-Series MFDs may be mated to the fishfinder xducer from A-Series Classic MFD, DS400X, DS500X, or DS600X?

Raymarine and Airmar 50/200 kHz fishfinder transducers which had been successfully used with the A-Series Classic MFDs featuring internal 50/200 kHz fishfinder circuitry (A50D, A57D, A70D) may simply be unplugged from the Transducer socket of the A-Series MFD and instead may be interfaced to the Transducer socket of any of the following MFDs:
- a-Series MFDs featuring internal 50/200 kHz ClearPulse Fishfinder circuitry (a67, a77, a97, a127)
- c-Series MFDs featuring internal 50/200 kHz ClearPulse Fishfinder circuitry (c97, c127)
- e-Series MFDs featuring internal 50/200 kHz ClearPulse Fishfinder circuitry (e7D, e97, e127)
- eS-Series MFDs featuring internal 50/200 kHz ClearPulse Fishfinder circuitry (eS77, eS97, eS127)


RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)