Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SR150 to eS127 MFD
10-29-16, 01:28 PM
Post: #1
SR150 to eS127 MFD
We are looking to directly connect the SR150 Sirius receiver to the eS127 without using an HS5.

Can the cable from the SR150 connect directly to the back of the eS127 HS network plug or do we require a crossover connector, and if so which one?
Find all posts by this user
Quote this message in a reply
10-31-16, 09:45 AM (This post was last modified: 10-31-16 09:46 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: SR150 to eS127 MFD
Lazybones,

Both the SR150 and a/c/e/eS/gS-Series MFDs feature RayNet (M) sockets. These products may be interfaced directly to one another via an appropriate length of RayNet (F) to RayNet (F) Cable. No crossover coupler is required should the system not include a network switch.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)