Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I40 depth install
11-01-16, 01:41 PM (This post was last modified: 11-03-16 09:43 AM by Chuck - Raymarine - Moderator.)
Post: #1
I40 depth install
I wanted to install an additional I40 depth instrument as a repeater into my I70/ITC5 backbone. My question is do I need to install the seatalk1 to seatalkng converter setup or can I simply use the adaptor cable A06047 for the I40 to get the depth data off of the network?
Find all posts by this user
Quote this message in a reply
11-03-16, 09:54 AM
Post: #2
RE: I40 depth install
Welcome to the Raymarine Forum Jharvey,

The i70/i70S, p70/p70R, i50, and i60 products cannot simultaneously be interfaced as a spur to the SeaTalkng backbone and be interfaced via the SeaTalk to SeaTalkng adapter cable to a SeaTalk bus or SeaTalk device (ex. i40, ST60, etc.). In this case, it will be necessary to install a SeaTalk to SeaTalkng Converter within to SeaTalkng backbone to support using the i40 as a repeater.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)