Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yamaha command link engine ID problem
11-16-16, 09:57 AM (This post was last modified: 11-30-16 02:27 PM by Chuck - Raymarine - Moderator.)
Post: #7
RE: Yamaha command link engine ID problem

Updating the MFD's software does not necessarily update the software of interfaced Raymarine devices. Updating of the peripheral devices is dependent upon options selected during the update process. Please click here to view a FAQ addressing how to determine the versions of software within the products of your Raymarine system.

As indicated, the v17.45 a/c/e/eS/gS-Series MFD software update was release prior to the start of the 2016 boating season and has been installed on countless vessels having Yamaha engine systems with ECI-100 engine gateways. This is the first such report received of a problem associated with engine identification, making it seem quite unlikely that the problem is associated with the R17 software update. However, should you desire to downgrade your MFD's software to R16, it may be downloaded to your computer by clicking here. Instructions for copying the software update files to a microSD memory card and for performing the software update may be found here.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: Yamaha command link engine ID problem - Chuck - Raymarine - Moderator - 11-16-16 09:57 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us