Raymarine forum / Raymarine Forums / Multifunction Displays v / GS165 and eS98 network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GS165 and eS98 network
03-08-17, 05:01 PM
Post: #13
Firewood Offline
Junior Member
**
 		Posts: 19
Joined: Sep 2016
Reputation: 0
RE: GS165 and eS98 network
Thank you - Scary thing is its all starting to make sense to me.

If I opt to use an Axiom 7 DV rather than the A78 am I correct that I can use the DV transducer of the Axiom and my P66 transducer via a Y cable. And eliminate the need for the DSM300 box?

I do realize the Axiom will not be compatible with my GS165 until the software is upgraded to Lighthouse 3.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
GS165 and eS98 network - Firewood - 11-09-16, 07:08 PM
RE: GS165 and eS98 network - Firewood - 11-10-16, 12:20 PM
RE: GS165 and eS98 network - Firewood - 11-10-16, 03:13 PM
RE: GS165 and eS98 network - Firewood - 11-11-16, 01:17 PM
RE: GS165 and eS98 network - Firewood - 11-11-16, 03:42 PM
RE: GS165 and A78 network - Firewood - 03-03-17, 05:06 PM
RE: GS165 and eS98 network - Firewood - 03-08-17 05:01 PM
RE: GS165 and eS98 network - Firewood - 03-31-17, 11:21 AM
RE: GS165 and eS98 network - Firewood - 03-31-17, 01:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication