Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RayTech 6.2 reporting that E86026 Navionics Multicard Reader needed
11-15-16, 04:08 PM (This post was last modified: 01-10-17 03:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
RayTech 6.2 reporting that E86026 Navionics Multicard Reader needed
RayTech 6.2 reporting that E86026 Navionics Multicard Reader needed

When running RayTech Planner / RNS software the following alert message will be generated whenever the user has plugged a Navionics chart card into any memory card reader other than the E86026 Navionics Multicard Reader.

[Image: attachment.php?aid=651]

This memory card reader which was designed to be plugged into the PC's USB port had been developed by Navionics and was also sold by manufacturers of PC navigational software supporting Navionics cartography (ex. Fugawi, etc.).

[Image: attachment.php?aid=652]

If encountering this message when using a Navionics Multicard Reader and RayTech Planner / RNS 6.2, then it is recommended that the RayTech RNS / Planner 6.2 software be uninstalled and that RayTech RNS / Planner 6.1 be installed on the PC. As the Navionics Multicard Readers are no longer and have not been in some time, it is recommended those lacking a Navionics Multicard Reader and needing to plan waypoints and routes instead consider using Raymarine Voyage Planner PC software for such purposes.

This same alert may also be encountered within systems featuring PCs running RayTech RNS software which had been networked via an Ethernet (SeaTalkhs network) to a system featuring E-Series Classic MFDs or C-Series Widescreen MFDs. In such systems, the MFD is responsible for serving Navionics cartography to the PC running the RayTech RNS 6.x software (i.e. the Navionics chart card is inserted into the CF memory card reader of one of the MFDs).
- Should this problem be encountered within a system featuring E-Series Classic MFDs and a PC running RayTech RNS 6.2, then it is recommended that the RayTech RNS 6.2 software be uninstalled and that RayTech RNS 6.1 be installed on the PC.
- Should this problem be encountered within a system featuring C-Series Widescreen MFDs and a PC, then it is recommended that the Navionics Chart layer not be used. Alternatively, the Raster or C-Map Chart layers would be used for cartography.

RAYFAQ#


Attached File(s) Thumbnail(s)
       
Visit this user's website Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us