Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS data to two VHF radios
11-28-16, 01:56 PM
Post: #1
AIS data to two VHF radios
I have one AIS transponder that is connected to two E127's via NMEA2000 network. One E127 is at an upper helm with a VHF radio and the second E127 is at the lower helm with a second VHF radio. How do I get AIS/GPS data to both VHF radios? The radios have NMEA0183 connections.
Find all posts by this user
Quote this message in a reply
11-28-16, 02:37 PM
Post: #2
RE: AIS data to two VHF radios
Welcome to the Raymarine Forum jrhodes777

Raymarine MFDs are neither designed to bridge AIS data from SeaTalkng/NMEA 2000 to NMEA 0183 nor vice versa. Accordingly, should your VHF radio support use of NMEA 0183 AIS sentences, then a NMEA 2000 to NMEA 0183 data bridging device (ex. Actisense NGW-1-ISO-AIS, etc.) would be need to be installed between the SeaTalkng/NMEA 2000 backbone and the VHF radios. This same data bridge should support supplying the VHF radios with GPS data.
Find all posts by this user
Quote this message in a reply
11-28-16, 03:52 PM (This post was last modified: 11-28-16 04:28 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: AIS data to two VHF radios
Thanks Chuck.

John Rhodes
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)