Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
No MFD in system - How do I update the software within my Raymarine products?
12-22-16, 02:19 PM (This post was last modified: 01-10-17 11:21 AM by Chuck - Raymarine - Moderator.)
Post: #1
No MFD in system - How do I update the software within my Raymarine products?
No MFD in system - How do I update the software within my Raymarine products?

The software of Raymarine products (MFDs excluded) whose designs include a SeaTalkng / NMEA 2000 communications interface is designed to be updated via a Raymarine Multifunction Display having a SeaTalkng / NMEA 2000 communications interface. Should one's marine electronics system not include a Raymarine Multifunction Display having a SeaTalkng / NMEA 2000 communications interface communications interface, then the software of one's Raymarine products having a SeaTalkng / NMEA 2000 communications interface may also be updated by any of the following:
- Raymarine dealers equipped to perform this service … recommend consulting your dealer prior to bringing equipment to the dealer;
- Certified Raymarine Installers … recommend advising the Certified Raymarine Installer that your system does not feature a Raymarine MFD having a SeaTalkng / NMEA 2000 communications interface prior to engaging the installers services;
- Raymarine’s Product Repair Center.

RAYFAQ#
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us