Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing a SeaTalkng backbone to a third party backbone
01-09-17, 11:29 AM (This post was last modified: 01-10-17 09:23 AM by Chuck - Raymarine - Moderator.)
Post: #1
Interfacing a SeaTalkng backbone to a third party backbone
Interfacing a SeaTalkng backbone to a third party backbone

For simplicity, it is generally recommended that the NMEA 2000 backbone be constructed from components of a single manufacturer. Spur adapters may then be used to adapt products to be mated as spurs to the backbone. Please click here to view a FAQ addressing this subject.

Should one desire to mate a SeaTalkng backbone to an existing third party backbone, then the backbone cables may simply be spliced together. Raymarine's SeaTalkng Backbone Cables have been constructed of leads matching those specified within the NMEA 2000 standard ... click here to view a related FAQ. Should one desire to mate a SeaTalkng backbone to an existing third party backbone which has been constructed of cables terminating in DeviceNet plugs and sockets, then it would be recommended that a field installable DeviceNet (M) or DeviceNet (F) connector (ex. Maretron Micro/Mid Field Attachable Connectors, etc.) be used to replace one of the backbone plugs of a SeaTalkng Backbone Cable.

RAYFAQ#
Visit this user's website Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us