Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing a product's NMEA 2000 interface to SeaTalkng backbone
01-09-17, 01:51 PM (This post was last modified: 07-03-17 10:21 AM by Chuck - Raymarine - Moderator.)
Post: #1
Interfacing a product's NMEA 2000 interface to SeaTalkng backbone
Interfacing a product's NMEA 2000 interface to SeaTalkng backbone

Raymarine offers adapters to mate Raymarine and third party products having a NMEA 2000 communications interface to a spur socket of a SeaTalkng backbone which has been constructed from Raymarine SeaTalkng networking components. Should the third party product's NMEA 2000 communications port or its NMEA 2000 spur cable feature a DeviceNet (M) or DeviceNet (F) socket or plug, then one the following adapters may be used to interface the third party product as a spur to a SeaTalkng backbone:
- A06045 / 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F)
- A06075 / 39.4in (1.0m) SeaTalkng Spur to DeviceNet (F)
- A06078 / 3.9in (0.1m) SeaTalkng Spur to DeviceNet (M)
- A06076 / 39.4in (1.0m) SeaTalkng Spur to DeviceNet (M)
- A06046 / 59.1in (1.5m) SeaTalkng Spur to DeviceNet (M)

Should the third party product's NMEA 2000 communications port or its NMEA 2000 spur cable not feature a DeviceNet (M) or DeviceNet (F) socket or plug, then one the following adapters may be spliced to the third party product's NMEA 2000 cable:
- A06043 / 3.25ft (1m) SeaTalkng Spur to Stripped End Cable ... to be spliced to third party cable featuring a proprietary plug
- A06044 / 9.75ft (3m) SeaTalkng Spur to Stripped End Cable ... to be spliced to third party cable featuring a proprietary plug


RAYFAQ#
Visit this user's website Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us