Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can Raymarine MFDs be powered from a SeaTalkng backbone?
02-14-17, 11:37 AM (This post was last modified: 02-14-17 11:37 AM by Chuck - Raymarine - Moderator.)
Post: #1
Can Raymarine MFDs be powered from a SeaTalkng backbone?
Can Raymarine MFDs be powered from a SeaTalkng backbone?

Unlike Raymarine autopilot control heads (ex. p70/p70S/p70/p70RS, ST70, etc.) and instrument displays (i50, i60, i70, ST70, etc.), SeaTalkng Smart Transducers (ex. P79S, DT800, DST800, etc.), and EV-1 Sensor Core, Raymarine's MFDs are exclusively designed to be powered via the power cable which is packaged with the MFD. The power cable should be powered by a switched 12 VDC or 24 VDC circuit (see the MFD's installation guide for power requirements). Raymarine's MFDs a neither designed to be powered by nor supply power to a SeaTalkng / NMEA 2000 backbone. Accordingly, the SeaTalkng /NMEA 2000 backbone must be powered via a power cable (preferred / best practice) or autopilot ACU/Course computer which will be interfaced to a spur socket within the backbone which will be located at the approximate midpoint of the backbone's LEN load.


RAYFAQ#
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)