Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help with DS400X
02-13-17, 01:36 PM (This post was last modified: 02-13-17 01:42 PM by Chuck - Raymarine - Moderator.)
Post: #1
Help with DS400X
Just bought a boat that has a DS400 and put the boat in the water and turned the unit on and all i had was a blue screen with water temp. nothing on depth or speed. Please Help
Find all posts by this user
Quote this message in a reply
02-13-17, 01:54 PM (This post was last modified: 02-13-17 01:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Help with DS400X
Welcome to the Raymarine Forum ONE2HUNT,

Please click here to view a FAQ addressing this subject. Should the fault isolation indicate a transducer failure, then the problem may be resolved by replacing the transducer with another compatible fishfinder transducer. However, should the fault isolation indicate a failure within the display, then the fishfinder would need to be replaced as Raymarine's Product Repair Center can no longer service DS400X/500X/600X Fishfinders. This class of fishfinder is typically replaced with a Dragonfly 4 Fishfinder or an a67 Multifunction Display.

Regarding Speed (through water) the fishfinder must be interfaced to a fishfinder transducer having a speed through water paddlewheel. Please respond with the model of transducer which has been interfaced to the DS400X.
Find all posts by this user
Quote this message in a reply
02-13-17, 09:08 PM (This post was last modified: 02-14-17 10:05 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Help with DS400X
Thank You
Find all posts by this user
Quote this message in a reply
02-14-17, 10:06 AM
Post: #4
RE: Help with DS400X
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)